How to Stop My Netgear Extender From Continuously Rebooting?


With the Netgear WiFi range extender, it is quite common to experience a few technical issues. And the internet keeps dropping is the most reported issue. To fix it, users opt for rebooting their extender. But what if your extender keeps rebooting? In such a case, this post can help you out.

In this how-to tutorial, you will learn how to prevent your Netgear WiFi extender from continuously rebooting. Let’s dig a little deeper.

Fix: Netgear Extender Constantly Reboots 

1. Place Your Extender on a Higher Shelf

Wrong placement is the most common reason why your Netgear extender’s performance is degrading. In the event that you have kept your extender inside a cabinet or on a lower surface, then you may experience issues with it. Instead of rebooting your Netgear extender again and again, pick up a higher and cool place for it. Apart from that, keep the following things in mind while choosing a location for your Netgear extender:

  • The extender should be at a certain distance away from electrical gadgets like microwaves, refrigerators, cordless phones, baby monitors, treadmills, etc.
  • Metal objects such as metal doors and aluminum studs can also create interference in the path of your Netgear extender’s WiFi signals.
  • Water resources and reflexive surfaces, e.g. fish tanks, mirrors, and glasses may downgrade the performance of your wireless range extender. So, keep it away from such things.

2. Keep Your Netgear Extender Near to Your Router

On the off chance if you have placed your Netgear WiFi range extender away from the reach of WiFi signals of your router, then you may get stuck with mywifiext not working error pop-up. As a result, you tend to power cycle your Netgear extender. Therefore, be certain to keep it in a center location of your home where your extender is getting proper WiFi signals of your router.

Read Also :   How to Migrate to a New Hosting Company?

3. Keep Your Device Connected 

In order to prevent any technical issues with your Netgear extender, it is recommended to connect to the Netgear_ext SSID. Just in case you are connected to an unknown WiFi network, it is pretty normal to experience major issues with the extender. Aside from that, the device (PC, laptop, or mobile) you are using should be updated and the web browser you use to log in to your extender must be free from malware, cache, junk files, browsing history, and cookies.

4. Update Your Extender’s Firmware 

Netgear extender firmware update is one of the best ways to get rid of the technical issues experienced by users. Updating the firmware to the latest version on a regular basis helps you resolve various major bugs and errors, improve security, and add new features. You can update your Netgear WiFi range extender’s firmware by following the instructions below:

  • Put your Netgear extender on power.
  • Connect it to the router via an Ethernet cable.
  • Ensure that your router is turned on as well.
  • Launch a web browser on your computer or laptop.
  • Type in the URL bar and press the Enter key.
  • Doing so will redirect you to the Netgear extender’s dashboard.
  • Head over to the Firmware Update section.
  • If there is any new firmware version available, walk through the on-screen steps to update it immediately.

5. Check the Power Supply

Keep checking the power being supplied to your Netgear wireless range extender. A discontinuous or improper power supply to your extender might degrade its performance. To get rid of the issue, verify if your Netgear extender is getting a steady power supply or not. Moreover, check the electrical socket you are using. It must not be damaged or short-circuited. The Power LED on your Netgear wireless range extender should be solid green.

Read Also :   Are 404 Errors Bad for Your SEO Efforts?

The Final Words

The above-mentioned are some of the surefire tips to prevent your Netgear WiFi extender from constantly rebooting. Why waiting? Go ahead and try these troubleshooting methods to fix issues with your Netgear wireless extender without rebooting it again and again.


Please enter your comment!
Please enter your name here