Are you experiencing a blinking orange light on your Linksys extender? Are you unable to stream your favorite movies and videos using the Linksys extender? There is no need to worry! Let us help you fix the blinking orange issue with your Linksys extender in a matter of minutes. As a result of this tutorial, you will be able to make your Linksys extender up and running. You will be able to enjoy seamless internet connectivity throughout your entire home. It’s time to get the ball rolling! Let’s get started right away!
Located on the front panel of your Linksys WiFi range extender, you will find a Light Emitting Diode (LED) which gives you information about the operation and functionality of the device.
Blinking Green
- Linksys extender is starting up.
- Linksys extender is resetting to factory defaults.
- Linksys extender is upgrading firmware.
Solid Green
- Linksys extender is ready to use.
Solid Orange
- Weak WiFi signal with the router.
- Linksys range extender setup process not completed.
You need to place your Linksys extender closer to your router in order to resolve the solid orange LED issue. In addition to that, you need to make sure that you have completed the setup process for your Linksys range extenders. When you are setting up your Linksys extender, keep in mind that it is very important to get live and active WiFi signals coming out of your main router while setting up the Linksys extender.
Blinking Orange
- Your Linksys extender is not connected to the router.
As a result, in order to fix this, you should make sure you place your Linksys extender and your router in closer proximity to each other.
How do you solve the problem of your Linksys extender blinking orange all the time? The good news is that you don’t have to worry about anything! Listed below are the steps you need to follow in order to resolve the blinking orange issue with Linksys extenders.
Troubleshoot Linksys Extender Blinking Orange Issue
The blinking orange issue on a Linksys extender can occur either after a reset is performed, or after updating the firmware of the device. Whatever the reason is for your Linksys extender blinking orange issue, the tips from our technical department will help you fix it in no time. a flash, regardless of the reason.
Reboot Your Linksys Extender
Unplugging the Linksys extender from the outlet and plugging it back in after a few minutes will fix the blinking orange issue. Your extender’s power LED will start blinking after it is turned on for the first time, and will eventually become stable after some time. I hope you have been able to fix your Linksys extender blinking orange issue after reading this tip. If the above tip does not work for you, try the next one.
Check the Linksys Extender Firmware Version
If you are experiencing Linksys extender blinking orange problems after updating its firmware, make sure that you have updated the right version of firmware and that you have performed the process correctly in order to resolve the issue. In addition, you should keep in mind that updating the wrong firmware version on your device may also result in you getting stuck with a Linksys extender blinking orange issue. The firmware updates for your device can be found by logging in to the extender.Linksys.setup page and checking for updates there. The new firmware version should be updated as soon as possible if it is available.
Check the cable connections.
It is possible that you have been experiencing the Linksys extender blinking orange issue because there might be a problem with the Ethernet/wired connections that you are using. Therefore, it is important that you check the Ethernet cable that you have used to connect your Linksys extender to the router that you have used. Additionally, you must make sure that the cable connection that you have made is secure and that it has been properly established. It is important to ensure that your Ethernet cable is not damaged and that your router and Linksys extender are both supplied with the appropriate power supply.
Reconfigure Your Linksys Extender
There’s no doubt in my mind that you read that correctly! The Linksys extender blinking orange issue can also be caused by the partial configuration of your Linksys WiFi range extender, which can also be the cause of the Linksys extender blinking orange issue. To get this issue fixed, reset your Linksys extender to the default settings and then configure it again by accessing extender.linksys.com page.
As a result, we hope that you have been able to resolve the issue of your Linksys extender blinking orange after you have reconfigured your device by accessing the extender.linksys.com page. I would strongly recommend that you contact our experts right away via comments if you are still experiencing the same problem after following the Linksys extender troubleshooting tips that are given in this tutorial.